Low phase noise - push-pull input section with ECC91 / 6J6 Darius FM tuner circuit and images description of the EC900 EF95 input and mixing part A few words about the ratio detector tube stereo decoder implementation with example The VHF FM IF with EF89 2x 6BN6 and EF91 Low Phase Noise - push-pull input section with ECC91/6J6
I think is a recipient did not accept problem with VHF-FM, the phase noise of the oscillator. If the favorite stations with strong signal strength and be heard without interference, then determined the phase noise of the oscillator significantly the signal to noise ratio of low frequency.
The self-oscillating mixer does not require additional buffering and matching circuits add the phase noise, which is directly to the action. Therefore, it is still the first choice.
The phase noise is mainly by changes in capacitance in the oscillator circuit over a vibration cycle. Small oscillation amplitudes get less capacity to change, since the avoidance of retuning or tuning diode / Reaktanzstufen greatly reduces the phase noise.
further can reduce the phase noise by compensating for changes in capacity using the push-pull circuit. the low protective capacity of a tube, enlarged sich die Kapazität der anderen Röhre im Oszillator.
Beim Bau von UKW Stufen ist es schwierig die Katoden der Röhren zu erden, da die Induktivität der Zuleitung zur Katode im Weg liegt. Dieses Problem besteht selbstverständlich auch bei Gegentaktschaltungen. Eine Spezialröhre löst dieses Problem sehr elegant. Bei der
6J6 (=ECC91) liegen beide Triodensysteme symmetrisch zum gemeinsamen Katodenprofiel. Durch die Gegentaktschaltung erdet sich die Katode so selbst.
Grund genug diese Doppeltriode sowohl in der Vorstufe als auch in der selbstschwingenden Mischstufe, in Gegentaktschaltung, zu verwenden.
Das Schaltbild zeigt den ECC91 Eingangsteil (UKW-Tuner Modell 1995)
This work is licensed under a Creative Commons Attribution
-Noncommercial-No Derivative Works 2.0 United States License .